HSE - Safety Goodwe

How To Minimizing Workplace Injuries by Maximize Efficiency Prevent Workplace Injuries From unexpected falls to machinery mishaps, accidents at work are unpredictable and can happen to anyone many injuries are reported in private industry employers. Putting in the extra effort to guarantee your work environment is safe shows employees you care about their well-being and may help improve workforce morale and productivity. By taking action and following these precautionary steps, you can prevent common workplace injuries and protect your employees. Falls Falls have the unfortunate (but unsurprising) distinction of being the most common type of work injury. In one swift movement, you can hurt your body and your dignity. Slips, trips, and falls often can be avoided by keeping work spaces free of clutter; less to trip over means fewer injuries. Keep walkways clear, boxes and files organized and properly stored, and electrical cords secured an...

Why Hand Injuries  Are Frequently Happens At Workplace ?   Workplace Safety All too often, hand injuries occur when employees are distracted and aren't focused on where they are or what they're doing. It's incredibly important for employers to eliminate as many distractions as possible. The hands are among a worker's most valuable tools, used for everything from threading delicate electrical wires to cutting through a thick steel pipe. Yet, despite how often the hands are used, hand safety and injury prevention can often be overlooked by both employers and employees. Every year many workers are sent to the emergency room each year because of serious hand injuries. From lacerations and cuts to burns and broken bones, these injuries can be costly for employers sometimes the cost of hand injuries, and the results may be surprising to some employers: It's also important to note that these numbers don't account for the indirect...

www.safetygoodwe.com Employee Right-to-know Initial and annual training is required for employees with routine exposure to harmful chemicals, physical agents and infectious agents. Training can be done effectively in work areas and it must be documented. Safe procedures: Discuss with employees: The chemicals used in their work area. Primary routes of entry: inhalation, ingestion and absorption. The new label format under GHS and secondary container labeling used in the workplace. The meaning of the nine pictograms used on labels. The location of Safety Data Sheets (SDS) in the workplace. How to understand and read the SDS. There are 16 sections on each SDS and information in each section should be reviewed. Location of emergency eye washes, first aid kits, etc. Proper storage of hazardous chemicals. Required Personal Protective Equipment and how to properly use and wear it. Chemical Hazards Be familiar with the chemicals, read labels and SDS. U...

Why Most Of Hand Injuries Happens While Working With Hand Tools ? Here are some facts about hand injuries and hand tools: ·         Getting injured using hammers. ·         Getting injured using standard blade screwdrivers & crescent wrenches. ·         Yearly many people end up in the emergency room as a result of hand tool related injuries. Root cause of incidents: The improper use of hand tools causes many injuries everyday throughout the globe. Tools are not used as intended, they are used improperly or they are in poor condition. It is very important to inspect any hand tool prior to its use. Ensure the tool is not worn, broken and is in good working condition. Here are some other tips: Hammers ·         Never use a hammer with a splintered, cracked, or loose handle ·   ...

www.safetygoodwe.com What is Root Cause Analysis?  Root Cause Analysis (RCA) is a method used to identify the underlying causes of a problem or incident. It involves a systematic investigation to determine the primary cause of an issue, rather than just treating the symptoms. The goal of RCA is to identify the underlying factors that contributed to the problem, and to implement corrective actions to prevent similar issues from occurring in the future. The steps involved in conducting an RCA include: Define the problem Gather data and information Identify possible causes Analyze and evaluate the causes Identify the root cause Develop and implement corrective actions Verify the effectiveness of the corrective actions  Some common tools and techniques used in RCA include: Fishbone diagrams (Ishikawa diagrams) Fault tree analysis Event and causal factor charting SWISS (Structured What-If Scenario Search) Six Thinking Hats RCA is an important tool for continuous improvement and is ...

Different types of injuries were workers get hurt  Accidents can happen anywhere and at any time. Many workplace accidents and injuries can be prevented if workers know the cause of accidents and they know how to protect themselves to avoid the injury. Although no one wants to get hurt at work, there are four major causes for injuries on the job. Back injuries :- The no one cause of on the job injuries is physical overload. These injuries are caused by lifting, ( lifting too heavy load or lifting improperly ) straining, over reaching, bending and twisting. To protect your back against injury, learn and use proper lifting techniques, never bend or twist while lifting or carrying, and whenever possible, use a mechanical aid or get help from another worker. Hitting or striking against :- The second most common cause of worker injury is being hit by or hitting against an object. The best way to protect against these accidents is to be alert to the potential...

www.safetygoodwe.com What do you have to look at while inspecting a welding machine ? Safety features: Ensure the machine is equipped with proper safety features like grounding, shielding, and electrical insulation. Cables and connections: Check for damaged or worn-out cables, plugs, and sockets. Verify secure connections and proper wiring. Electrical components: Inspect the condition of electrical components like switches, contactors, and fuses. Welding gun and cable: Check the welding gun and cable for damage, wear, or corrosion. Shielding gas system: Verify the proper functioning of the shielding gas system, including hoses and regulators. Cooling system: Check the cooling system, including hoses, radiators, and fans, for proper function and damage. Machine condition: Look for signs of wear, rust, or damage on the machine's exterior and interior. Voltage and current settings: Verify the correct voltage and current settings for the specific welding process. Grounding and e...

Why the new workers need to know in safety when joined ? Your organization has recently filled some of open positions, and it's time to put new employees to work. First, though, you need to make sure they understand your facility's safety ins and outs. This checklist can help you ensure that you cover all of your new employee safety orientation bases. Before they start working on day one, your new hires need to be familiar with: Safety rules. It's not always obvious that a rule—for example, rules about visitors to the facility, signing in and out, and similar controls —is safety-critical, so make sure workers understand all relevant rules. Company policies. As with safety-related rules, it may not be obvious that some policies—for example, policies on working alone—are important for safety reasons. Potential hazards. Walk through the work area, and point out important hazards new workers need to be aware of. Emergency procedures. New workers need to ...

www.safetygoodwe.com Chapter : Waste Management Safety

www.safetygoodwe.com Chapter : Chemical Safety / MSDS New Chemical Safety Tools: A Closer Look In this article, we'll take a closer look at the first of OSHA's new tools, an online guide titled Transitioning to Safer Chemicals: A Toolkit for Employers and Workers. Tomorrow, we'll tell you more about the annotated PEL tables and how to access them. The two new tools designed to help employers protect their workers from exposure to hazardous chemicals. The first tool helps employers identify safer chemicals and the second is a web resource called the "Annotated Permissible Exposure Limits," or annotated PEL tables, which OSHA says will enable employers to voluntarily adopt newer, more protective workplace exposure limits. While use of the tools is voluntary, OSHA strongly urges businesses to adopt these measures because many of its exposure limits are outdated and do not adequately protect workers. At the core of the toolkit is a seven-step pr...

www.safetygoodwe.com Chapter : Chemical Safety / MSDS

www.safetygoodwe.com Chapter : Chemical Safety / MSDS Common HazCom Mistakes and Tips for Compliance As per standards all employers must have to get trained workers who may be exposed to hazardous chemicals in the workplace on the dangers these chemicals may pose and how to protect  themselves. So what pieces of the HazCom law tend to trip employers up the most? The most common HazCom mistake is not having a written plan. Other common errors include: Inadequate employee training Improper labels on chemical containers Lack of, or lack of access to, safety data sheets (SDSs) Not Having a Plan During an inspection, the written plan is often the first piece of your HazCom system an inspector will ask to see. Key elements of a written HazCom plan include the following: Identification of key personnel Description of the methods an employer will use to inform employees of the hazards of non-routine tasks and hazards associated with chemicals containe...

www.safetygoodwe.com Chapter : Chemical Safety / MSDS Make Sure Your HazCom Employee Training Is GHS-Compliant Topic: Training Training on label elements must include information on the type of information employees would expect to see on the new labels, including: Product identifier.  This refers to how the hazardous chemical is identified. This can be (but is not limited to) the chemical name, code number or batch number. The manufacturer, importer or distributor can decide the appropriate product identifier. The same product identifier must be  both on the label and in Section 1 of the SDS (Identification). Signal word.  This is used to indicate the relative level of severity of hazard and alert the reader to a potential hazard on the label. There are only two signal words, "Danger" and "Warning." Within a specific hazard class, "Danger" is used for the more severe hazards and "Warning" is used for the less severe hazar...

Spill Response Training www.safetygoodwe.com Chapter : Chemical Safety / MSDS Chemical Spill Response Training Topic: Training Why Training Requires:  Chemical spills can cause great damage in the workplace and in the community. As such, they need to be immediately identified and reported so that they can be contained as quickly as possible. Training is key to stopping chemical spills in their tracks. Here are some key actions employees need to be trained to take if they identify a chemical spill: Once you have identified a spill and safely evacuated the spill’s immediate area, it is safe to call for help. Contact your company’s emergency response team by following the procedures outlined in the Emergency Response Plan. Request additional resources if necessary. Ask for instructions on what you should do until help arrives. When reporting the spill, you need to provide responders with some vital facts on the ground, such as: Information to the...