HSE - Safety Goodwe

www.safetygoodwe.com Chapter : Safety Management  Safety Audit; Difference Between Audit & Inspection A safety audit is a procedure in which a facillty collects data on one or more workplace components to assess the risk of health or safety concerns. The purpose of safety audits is accountability. Safety audits are intended to guarantee that a company's physical and human assets are protected by compelling program features for recognizing, reducing, or mitigating hazards. Types of Safety Audits Compliance Audits A compliance audit is the simplest and most rudimentary type of safety audit. Compliance audits examine whether your business adheres to the safety standards outlined in its bylaws, processes, rules, regulations, and any associated liabilities. The norms of the country are crucial in establishing these standards. The compliance audit also examines if the workplace is safe and free of dangers as organizations should make every effort to decrease the ...

www.safetygoodwe.com Chapter : Safety Article  Portable Generator - To Ground or Not to Ground It is not always clear as to when to (or when not to) ground (connect to the earth) a portable electrical generator. There are many factors that influence the decision. It may surprise you to know that sometimes you should NOT supply an additional grounding rod to the generator; sometimes it really doesn’t matter; and sometimes you should ground your generator. So it is important for you to know the difference so that you can have your system in a safe operating condition at all times. Portable generators are used to generate electricity on a much smaller scale then the utility companies. For that reason, they are ideal for temporary, remote or emergency electrical service. Depending on how the generator is being used, it will need to be properly wired for the application. It is nearly impossible to address every application in this forum. This article was intended to...

www.safetygoodwe.com Chapter: Work At Height

www.safetygoodwe.com Chapter: Personal Protective Equipment

www.safetygoodwe.com Chapter : Risk Management Risk Assessment: Assessing and Mitigating ( Risks Initial, Residual, and Real  Time Considerations in Occupational Health Safety) Risk Assessment: Risk assessment is a systematic process of identifying hazards and evaluating any associated risks within a workplace, then implementing reasonable control measures to remove or reduce them.  Risk Assessment Types: Qualitative risk assessment. Quantitative risk assessment.  Generic risk assessment. Site-specific risk assessment.    Dynamic risk assessment.  Risk Assessment Steps: Identify the hazards. Decide who might be harmed and how. Evaluate the risk and decide precautions. Record findings and implement.  Review and update the risk assessment.  Risk Matrix: Risk matrix is a matrix that is used during risk assessment to define the level of risk by considering the cateagory of probability or likelihood against the category of conseque...

www.safetygoodwe.com Topic: Safety Article    Reporting Safety Observation  ReportingSafety observation  is a process that involves employees identifying and documenting unsafe behaviours, conditions or potential hazards in the workplace. This methods empowers workers to act as extra " eyes and ears" for safety, providing real-time insights that might otherwise go unnoticed by management. it fosters a safety-first culture where everone contributes to maintaining a safe environment.  It palys a vital role of creating a safe workplace contributes to morale, productivity and well being. By engaging employees in the safety process, build a strong safety culture were employees responsible for maintaining safety standards. This proactive approach not only prvent accidents but also save lives.  Hence, its a proactive tool vital for fostering a sfae working environment and ensuring everyone gets home safely at end of each workday. So understa...

www.safetygoodwe.com Chapter:Behavioral Safety 

www.safetygoodwe.com Chapter : Lockout Tagout (LOTO) Lockout/Tagout (LOTO) and Its Importance for Safety     Lockout/Tagout When it comes to lockout procedures, a shortcut in the process can literally mean the difference between life and death. Long considered an important part of the safety program, lockout procedures protect not only the employees working on a piece of equipment, but also co-workers and contractors working onsite. Lockout/Tagout (LOTO) is a safety procedure used to ensure that dangerous machines are properly shut Off and not started up again before the completion of maintenance or repair work. Lockout refers to the specific steps taken to safeguard employees from unexpected startup of machinery and equipment or the release of hazardous energy during setup, service, or repair. To lock out equipment, a lock is placed on the energy source, control, or isolating device. Importance of LOTO Prevents Accidents: LOTO prevents...

www.safetygoodwe.com Chapter : Forklift Safety Situations That Can Tip a Forklift—And How to Control Them Forklifts are designed to lift and move heavy loads. The forklifts themselves must be heavy to prevent them from falling forward when the load is lifted. Forklifts also tend to be small and narrow to navigate tight workspaces. Being small, narrow, and heavier than they look can be a recipe for tipping if workers are not careful. Tip over accidents are more likely in certain situations and circumstances. Make sure your workers know their specific truck, terrain, and load, and take precautions to prevent tipovers. (Eg. A Driver/Worker was preparing to move large bundles of steel at a construction project. As he positioned his forklift, it tipped, pinning him. By the time emergency responders reached him, he was dead.) 1. Inadequately Secured Loads A load that is not secured can shift, tipping the lift. Workers must know: Not to move the truck until the load is se...

www.safetygoodwe.com Rigging Always Plays A Major Role At Workplace  Rigging is the most imperative aspect of lifting loads during various crane operations. Even with the safest crane and equipment, rigging always plays a major role in ensuring smooth crane operations and improved security. Individuals responsible for carrying out rigging should be experienced professionals, who thoroughly understand the rigging and its procedures. Safety is the most significant aspect of rigging. After all, the main purpose of rigging is to help reduce or eliminate injuries and accidents. The following are the six most important rigging hardware used for crane operations. Rigging Hooks Hooks used in rigging are designed to lift heavy objects and eliminate slippage, depending on the materials being moved. Rigging hooks are made of forged alloy steel and chosen based on safe weight load indication and have multiple types: sorting, eye, clevis grab and choker. Hooks ar...

www.safetygoodwe.com Topic : Safety Article  Culture and Principle Aspects For An Effective Safety Safety culture is an important topic but time consuming to inspect (because of the sample required) and difficult to tackle. It is recommended that it is only be taken on where there is good reason to believe that there is a significant issue to address, such as a poor safety record over a period, and wherethe company is likely to be receptive to advice. An organisation’s culture can have as big an influence on safety outcomes as the safety management system. ‘Safety culture’ is a subset of the overall company culture (and is defined in the box on the right). “The safety culture of an organisation is the product of individual and group values, attitudes, perceptions, competencies, and patterns of behaviour that determine the commitment to, and the style and proficiency of, an organisation’s health and safety management. Organisations with a positive safety cult...