SAFETY TALKS: Precautions taken GAS WELDING & CUTTING

Safety Talks: Precautions taken GAS WELDING & CUTTING

_________________________________________________

1. 

   Safety Videos

   Any hot work will start with a valid hot work permit.
2. Frequent gas test to be carried out.
3. In a gas welding or cutting operations, the oxyacetylene flames shall be ignited by the lighter specially designed.
4. The pressure regulators and gauges shall be suitable and in good working condition.
5. The cylinder valve must be closed before the regulator is removed.
6. Flash back arrestors should be fitted both end with the hoses to prevent flash back.
7. The adequate ventilation must be provided to expel toxic gases/fumes, if activities carried out inside a tank / vessel / any confined space.
8. All valves, flanges, drains, canals etc. where gas leaks or presence of flammable atmosphere is possible should be covered.
9. Combustible materials to be removed from welding point.
10. Valid Fire Extinguishers and Fire Watcher should be provided.
11. When need to cover the welding point with proper fire blanket.
12. When necessary, wet the area with water and pressurized firewater hose shall be provided.
13. Equipment, which will be used for hot work to be inspected before starting up the job.
14. All hose and cable, plugs and sockets must be in good condition.

 Visit for Safety Videos:  https://www.youtube.com/channel/UChREXvbLQ3fPxOLKflPRj_g